Specifications

2.Speaker Setup
Allows you to change the speaker configuration such as existence of
subwoofer, crossover frequency, and so on. Settings are automatically
configured if you use the Automatic Speaker Setup.
Furthermore, you will not be able to select this setting if you have a pair of
headphones connected or you are listening through your TV speakers.
Speaker Settings
Change the impedance of the connected speakers, the type of front speaker
connection and height speaker type.
Speaker Impedance (European models)
Default Value: 6ohms
Set the impedance of the connected speakers.
"4ohms": When any of the connected speakers have 4 Ω or more to
less than 6 Ω impedance
"6ohms": When the connected speakers all have 6 Ω or more
impedance
Front Speakers Type
Default Value: Normal
Select the type of front speaker connection.
"Normal": When front speakers are connected in a normal manner
"Bi-Amp": When front speakers are bi-amp connected
Height Speakers Type
Default Value: Not Use
Set the speaker type if height speakers are connected to the
SPEAKERS BACK or HEIGHT terminals. Select from the following
options according to the type and layout of the connected speakers:
"Not Use", "Front High", "Top Front", "Top Middle", "Dolby Enabled
Speaker (Front)", or "Dolby Enabled Speaker (Surround)".
If "Front Speakers Type" is set to "Bi-Amp", this setting will be set to
"Not Use".
Advanced Settings