Specifications

4096×2160 pixels depending on the resolution supported by the
connected TV)
If "1080p" is selected, 1080p/24 input signals will be output with
an unchanged resolution.
If the selected resolution is not supported by the monitor, the
video is output in the same resolution as the input signal.
If "4K" is selected, video signals may not be output to some types
of TV. For details, see "Supported Video Resolution of HDMI OUT
MAIN/SUB Jacks" in "Reference Information".
If "Monitor Out" is set to "SUB", this setting will be set to
"Through".
You can check the video on the TV while making this setting.
Select the value with the cursors and press ENTER. Press
RETURN if no video is displayed. (except when "NET", "USB" or
"BLUETOOTH" is selected)
HDMI Input
It is possible to change assignment of input selector buttons and the HDMI
IN jacks.
BD/DVD
Default Value: HDMI 1
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to
BD/DVD button. If you do not assign a jack, select "-----". To select an
HDMI IN jack already assigned to another input selector, change its
setting to "-----" first.
CBL/SAT
Default Value: HDMI 2
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to
CBL/SAT button. If you do not assign a jack, select "-----". To select an
HDMI IN jack already assigned to another input selector, change its
setting to "-----" first.
STB/DVR
Default Value: HDMI 3 (HDCP 2.2)
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to
STB/DVR button. If you do not assign a jack, select "-----". To select an
HDMI IN jack already assigned to another input selector, change its
setting to "-----" first.