Specifications

Bluetooth-enabled device for the first time, if the connection fails, select
"7. Hardware Setup" - " Bluetooth", execute "Clear" in "Pairing
Information", turn off and then on again your Bluetooth-enabled device to
clear the device name, and build the connection again.
If there is a metallic object near the unit, Bluetooth connection may not be
possible as the metal can effect on the radio wave.
If the wireless LAN and Bluetooth connections are used at the same time,
try to connect the ETHERNET port and router with the Ethernet cable
after selecting "7. Hardware Setup" - "Network" and changing "Wi-Fi" to
"Off (Wired)" for a better connection.
The Auto Reconnect function does not work
This function may not work depending on your Bluetooth-enabled device.
In this case, play on your Bluetooth-enabled device after pairing with this
unit.