Specifications

RI Dock for iPod/iPhone
There is no sound
Make sure your iPod/iPhone is actually playing.
Make sure your iPod/iPhone is properly inserted in the Dock.
Make sure the unit is turned on, the correct input source is selected, and
the volume is turned up.
Make sure the plugs are pushed in all the way.
Try resetting your iPod/iPhone.
There is no video
Make sure that your iPod/iPhone model’s TV OUT setting is set to On.
Make sure the correct input is selected on your TV or the unit.
Some versions of the iPod/iPhone do not output video.
The AV receiver’s remote controller does not control my iPod/iPhone
Make sure your iPod/iPhone is properly inserted in the Dock. If your
iPod/iPhone is in a case, it may not connect properly to the Dock. Always
remove your iPod/iPhone from the case before inserting it into the Dock.
The iPod/iPhone can not be operated while it is displaying the Apple logo.
Make sure you have selected the correct remote controller mode.
When you use the AV receiver’s remote controller, point it toward this
unit.
Before operating with the remote controller, you may need to play on your
iPod/iPhone to make the input selector be recognized.
Try resetting your iPod/iPhone.
Depending on your iPod/iPhone model and generation, some buttons
may not work as expected.
The unit unexpectedly selects my iPod/iPhone as the input source
Always pause iPod/iPhone playback before selecting a different input
source. If playback is not paused, the Direct Change function may select
your iPod/iPhone as the input source by mistake during the transition
between tracks.
iPod/iPhone does not work properly
Try reconnecting your iPod/iPhone.
Troubleshooting