Specifications

Bi-Amping
It is possible to connect speakers supporting bi-amping to improve quality of
the low and high pitched ranges. Up to 5.2 ch will be played in bi-amping.
Connections
1. Connect as below using the FRONT terminals and BACK or HEIGHT
terminals.
2. Turn the unit on and make the bi-amping setting.
1 After pressing RCV, press HOME on the remote controller.
2 With the cursors, select "Setup", and then press ENTER.
3 With the cursors, select the order of "2. Speaker Setup" – "Speaker
Settings" – "Front Speakers Type".
4 Select "Bi-Amp" with the cursors and press ENTER.
Before bi-amping, be sure to remove the short-circuit connector
that connects the tweeter (high pitched tone) terminal and the
woofer (low pitched tone) terminal.
Use speakers supporting bi-amping only. For details, refer to the
speakers' instruction manual.
Advanced Speaker Connection