Data Sheet

Bulletin 71.4:MR98
38
D
(MAX)
1/4
NPT*
NPT
OR SWE
B
ØC
A
TEE HANDLE DETAIL FOR ALL SIZES
EXCEPT 1/2 IN. / DN 15
G
FLANGE
D
(MAX)
B
14.00 / 355.6
ØC
1/4
NPT*
NPT
OR SWE
1/4
NPT
D
(MAX)
B
ØC
ØJ
A
TYPE MR98H (DIMENSIONS ALSO APPLY
TO TYPES MR98L AND MR98HH)
TYPE MR98HD (DIMENSIONS ALSO
APPLY TO TYPES MR98LD AND MR98HHD)
TYPE MR98H FLANGED BODIES AVAILABLE IN 1/2 TO 2 IN. /
DN 15 TO 50 BODY SIZES (DIMENSIONS ALSO APPLY TO TYPE MR98L)
HANDLE DETAIL FOR SIZE
1/2 IN. / DN 15 ONLY
Ø 3.50 /
88.9
SWE DETAIL
ØE
F
ERAA03807
ERAA03809
ERAA03811
ERAA03812 ERAA03808 ERAA03810
Table 22. Dimensions (continued)
TYPE MR98LD
BODY
SIZE,
In. / DN
A
B C D (Max)
SWE
J
Gray Cast Iron Steel/SST E F
In. mm In. mm In. mm In. mm In. mm In. mm In. mm In. mm
1/4 NPT 2.75 69.9 2.75 69.9 2.04 51.9 5.06 128.5 10.46 265.6 - - - - - - - - - - - - - - - - 4.00 101.6
1/2 / 15 3.88 98.6 4.00 101.6 1.85 47.1 7.00 177.8 11.62 295.2 0.86 21.8 0.38 9.7 4.00 101.6
3/4 / 20 4.88 124.0 5.00 127.0 2.27 57.6 10.19 258.8 13.89 352.8 1.07 27.2 0.50 12.7 4.00 101.6
1 / 25 4.88 124.0 5.00 127.0 2.27 57.6 10.19 258.8 13.89 352.8 1.34 34.0 0.50 12.7 4.00 101.6
TYPE MR98HD
1/4 NPT 2.75 69.9 2.75 69.9 2.04 51.9 3.19 81.0 10.38 263.7 - - - - - - - - - - - - - - - - 4.00 101.6
1/2 / 15 3.88 98.6 4.00 101.6 1.85 47.1 4.25 108.0 11.52 292.5 0.86 21.8 0.38 9.7 4.00 101.6
3/4 / 20 4.88 124.0 5.00 127.0 2.27 57.6 6.06 154.0 13.76 349.4 1.07 27.2 0.50 12.7 4.00 101.6
1 / 25 4.88 124.0 5.00 127.0 2.27 57.6 6.06 154.0 13.76 349.4 1.34 34.0 0.50 12.7 4.00 101.6
1-1/2 / 40 7.25 184.2 7.38 187.4 3.06 77.7 8.19 208.0 18.62 472.9 1.92 48.8 0.50 12.7 8.00 203.2
2 / 50 7.25 184.2 7.38 187.4 3.06 77.7 8.19 208.0 18.62 472.9 2.07 52.6 0.62 15.8 8.00 203.2
TYPE MR98HHD
1/4 NPT 2.75 69.9 2.75 69.9 1.98 50.4 3.19 81.0 13.74 349.0 - - - - - - - - - - - - - - - - 4.00 101.6
1/2 / 15 3.88 98.6 4.00 101.6 1.81 46.1 4.25 108.0 15.06 382.6 0.86 21.8 0.38 9.7 4.00 101.6
3/4 / 20 4.88 124.0 5.00 127.0 2.27 57.6 6.06 154.0 17.35 440.7 1.07 27.2 0.50 12.7 8.76 222.5
1 / 25 4.88 124.0 5.00 127.0 2.27 57.6 6.06 154.0 17.35 440.7 1.34 34.0 0.50 12.7 8.76 222.5
Ordering Information
When ordering, complete the ordering guide on this
page. Refer to the Specications section on pages 2
and 3. Review the description to the right of each
specication and the information in each referenced
table or gure. Specify your choice whenever a
selection is offered.
Ordering Guide
Type (Select One, see Specication section)
 MR98L
 MR98H
 MR98HH
 MR98LD
 MR98HD
 MR98HHD
D
(MAX)
1/4
NPT*
NPT
OR SWE
B
ØC
A
TEE HANDLE DETAIL FOR ALL SIZES
EXCEPT 1/2 IN. / DN 15
G
FLANGE
D
(MAX)
B
14.00 / 355.6
ØC
1/4
NPT*
NPT
OR SWE
1/4
NPT
D
(MAX)
B
ØC
ØJ
A
TYPE MR98H (DIMENSIONS ALSO APPLY
TO TYPES MR98L AND MR98HH)
TYPE MR98HD (DIMENSIONS ALSO
APPLY TO TYPES MR98LD AND MR98HHD)
TYPE MR98H FLANGED BODIES AVAILABLE IN 1/2 TO 2 IN. /
DN 15 TO 50 BODY SIZES (DIMENSIONS ALSO APPLY TO TYPE MR98L)
HANDLE DETAIL FOR SIZE
1/2 IN. / DN 15 ONLY
Ø 3.50 /
88.9
SWE DETAIL
ØE
F
ERAA03807 ERAA03809
ERAA03811
ERAA03812
ERAA03808 ERAA03810
D
(MAX)
1/4
NPT*
NPT
OR SWE
B
ØC
A
TEE HANDLE DETAIL FOR ALL SIZES
EXCEPT 1/2 IN. / DN 15
G
FLANGE
D
(MAX)
B
14.00 / 355.6
ØC
1/4
NPT*
NPT
OR SWE
1/4
NPT
D
(MAX)
B
ØC
ØJ
A
TYPE MR98H (DIMENSIONS ALSO APPLY
TO TYPES MR98L AND MR98HH)
TYPE MR98HD (DIMENSIONS ALSO
APPLY TO TYPES MR98LD AND MR98HHD)
TYPE MR98H FLANGED BODIES AVAILABLE IN 1/2 TO 2 IN. /
DN 15 TO 50 BODY SIZES (DIMENSIONS ALSO APPLY TO TYPE MR98L)
HANDLE DETAIL FOR SIZE
1/2 IN. / DN 15 ONLY
Ø 3.50 /
88.9
SWE DETAIL
ØE
F
ERAA03807 ERAA03809
ERAA03811
ERAA03812 ERAA03808
ERAA03810
Figure 4. Dimensions (See Table 22) (continued)
In. / mm
- continued -