Data Sheet

Bulletin 71.4:MR108
15
OrderingInformation
Use the Specications section on page 2 and
carefully review the description to the right of each
specication. Use this information to complete
the Ordering Guide on this page. Specify the
desired selection wherever there is a choice to be
made. Then send the Ordering Guide to your local
Sales Ofce.
1. Maximum setpoint is limited to 150 psig / 10.3 bar for constructions with Fluorocarbon (FKM) diaphragm.
2. Not applicable for constructions with Fluorocarbon (FKM) diaphragm.
OrderingGuide
BodySize(Select One)
NPS 1 / DN 25
NPS 2 / DN 50
NPS 3 / DN 80
NPS 4 / DN 100
ActuatorType(Select One)
Low Pressure
High Pressure
BodyMaterialandEndConnectionStyle(Select One)
Cast Iron
NPT (1 or 2 NPT only)
CL125 FF
CL250 RF
WCCSteel
NPT (1 or 2 NPT only)
CL150 RF
CL300 RF
CL600 RF
PN 16 RF
PN 16/25/40 RF (NPS 1 or 2 / DN 25 or 50 only)
CF8MStainlessSteel
NPT (1 or 2 NPT only)
CL150 RF
CL300 RF
CL600 RF
PN 16 RF
PN 16/25/40 RF (NPS 1 or 2 / DN 25 or 50 only)
CF3MStainlessSteel
NPT (1 or 2 NPT only)
CL150 RF
CL300 RF
CL600 RF
PN 16 RF
PN 16/25/40 RF (NPS 1 or 2 / DN 25 or 50 only)
Diaphragm,O-ringsandSealMaterials(Select One)
Nitrile (NBR)
Fluorocarbon (FKM)
Ethylene Propylene (EPDM)
ActuatorTypeandSetPressureRange(Select One)
Low-PressureActuator
5 to 14 psig / 0.35 to 0.97 bar, White
8 to 24 psig / 0.55 to 1.7 bar, Silver
12 to 30 psig / 0.83 to 2.1 bar, Orange
15 to 35 psig / 1.0 to 2.4 bar, Red
High-PressureActuator
25 to 40 psig / 1.7 to 2.8 bar, Blue
35 to 70 psig / 2.4 to 4.8 bar, Green
55 to 120 psig / 3.8 to 8.3 bar, White
90 to 200 psig / 6.2 to 13.8 bar, Silver
(1)
175 to 300 psig / 12.1 to 20.7 bar, Red
(2)
Optional
Inlet Pressure Gauge Tap on Body
Pressure-Loaded Actuator
Drain Valve
NACE Construction
Bleed Valve (For High-Pressure Actuator Only)
MainValveReplacementPartsKit(Optional)
Yes, send one replacement parts kit to match
this order.
ActuatorReplacementPartsKit(Optional)
Yes, send one replacement parts kit to match
this order.










