User manual

Network Settings
Liebert
®
IntelliSlot
®
Web Cards 28
Web Interface
To access SNMPv1/v2c Communities settings through the Web interface:
• Click on the Configure tab, then Access or V1 Access (under Management Protocol) in the
left panel and finally Edit in the right panel. After making changes, click Save.
NOTE
Avoid the following setting—it permits access by any host and may pose a security risk:
• Network Name = 0.0.0.0
• Access = write
•Community = public
Click on Edit
V1 Access
Configure
tab
Configure up to 20 devices for read/write access