User manual

Network Settings
Liebert
®
IntelliSlot
®
Web Cards 26
Web Interface
To access SNMP Communications settings (for Authentication Traps, RFC-1628 (UPS) MIB, Liebert
Global Products MIB and Heartbeat Trap Interval options) through the Web interface:
• Click on the Configure tab, then SNMP in the left panel (under Management Protocol) and
finally Edit in the right panel. After making changes, click Save.
• Note the options vary according to the type of equipment. RFC-1628 MIB features are available
for UPS/Power equipment only—not for Thermal Management and other equipment, as shown at
bottom in the examples below.
Click on Edit
to enable any
options
Interval choice
sets the
frequency of
Heartbeat
Traps
Management
Protocol
Configure
tab
OPTIONS FOR UPS/POWER EQUIPMENT
(includes RFC-1628 MIB features—retrieving data from RFC-1628 MIB objects and sending RFC-1628 MIB traps)
OPTIONS FOR THERMAL MANAGEMENT/OTHER EQUIPMENT
(does NOT include RFC-1628 MIB features)