User manual

System Configuration
10
Table 3 Service terminal navigation
Main Menu
1. System Information
1.1 Name
1.2 Contact
1.3 Location
1.4 Description
2. Network Settings
2.1 Boot / IP Settings
2.1.1 Boot Mode
2.1.1.1 Static
2.1.1.2 BootP
2.1.1.3 DHCP
2.1.2 IP Address
2.1.3 Netmask
2.1.4 Default Gateway
2.2 SNMP Communications
2.2.1 SNMP agent (enable/disable)
2.2.2 Authentication Traps (enable/disable)
2.2.3 Display / Modify Communities
2.2.4 Display / Modify Trap Communities
2.3 Web Server
2.3.1 Web Server (enable/disable)
2.3.2 Configuration Control (enable/disable)
2.3.3 Refresh rate
2.4 Telnet Server
2.4.1 Telnet server (enable/disable)
2.5 Change User Name / Password
2.5.1 Enter User Name (prompt)
2.5.2 Enter New Password (prompt)
2.5.3 Verify Password (prompt)
3. Firmware Updates
3.1 Initiate Xmodem Session
4. Factory Settings
4.1 Reset to Factory Defaults [y/n]
4.1.1 Manufacture Date
4.1.2 MAC Address
4.1.3 Serial Number
4.1.4 Boot Version
4.1.5 App Version
4.1.6 Hardware Version
5. Auxiliary Communications
5.1 Enable Application [y/n]
5.1.1 None
5.1.2 Modbus Server
5.1.2.1 Enabled Application
5.1.2.2 Control (enabled/disabled)
5.1.2.3 Server ID
5.1.2.4 Communications Rate (9600 fixed)
Q: Quit and abort changes
X: Exit and save