User manual

Data Monitored by Nform
64
APPENDIX B-DATA MONITORED BY NFORM
Liebert supplies a template for each SNMP device, containing data points and alarms applicable to
that device. The names of data points and alarms can be changed (see 9.2.2 - Views tab).
• Data points are the information Nform compiles from polling a managed SNMP device.
• Alarms are out-of-tolerance conditions that Nform reports to users.
Tables 13 and 14 below show sample data points and alarms for environmental and UPS units with
SNMP cards. Table 15 shows data points with sample values obtained from a UPS.
B.1 SAMPLE DATA POINTS AND ALARMS
The following tables show examples of data points and alarms for an environmental unit and a UPS.
Table 13 Sample data points and alarms - Environmental unit
Data points Alarms
lgpEnvTemperatureSettingDegF
lgpEnvTemperatureToleranceDegF
lgpEnvTemperatureSettingDegC
lgpEnvTemperatureToleranceDegC
lgpEnvHumiditySettingRel
lgpEnvHumidityToleranceRel
lgpEnvStateSystem
lgpEnvStateCooling
lgpEnvStateHeating
lgpEnvStateHumidifying
lgpEnvStateDehumidifying
lgpEnvStateEconoCycle
Alarms Present
High Temperature
Low Temperature
High Humidity
Low Humidity
Loss of AirFlow
Change Filter
High Head Pressure 1
High Head Pressure 2
Compressor OverLoad 1
Compressor OverLoad 2
Compressor Short Cycle
Compressor Low Suction
Pressure
Main Fan OverLoad
Manual Override
StandbyGlycoolPumpOn
Water Under Floor
Humidifier Problem
Low Water in Humidifier
Smoke Detected
Low Water Flow
Loss of Power Alarm
General Fault
Local Alarm1
Local Alarm2
Local Alarm3
Local Alarm4
StandbyUnitOn
Table 14 Sample data points and alarms - UPS unit
Data points Alarms
lcUpsIdentManufacturer
lcUpsIdentModel
lcUpsIdentSoftwareVersion
lcUpsIdentSpecific
lcUpsIdentFirmwareVersion
lcUpsIdentSerialNumber
lcUpsIdentManufacturerDate
lcUpsBatTimeRemaining
lcUpsBatVoltage
lcUpsBatCapacity
lcUpsInputFrequency
lcUpsInputNumLines
lcUpsOutputFrequency
lcUpsOutputLoad
lcUpsInverterStatus
lcUpsAlarms
lcUpsTestBatteryStatus
lcUpsOnBypass
lcUpsBypassFrequency
lcUpsBypassNumLines
lcUpsConfigType
lcUpsConfigBypassInstalled
lcUpsConfigModuleCount
lcUpsConfigAudibleStatus
lcUpsConfigLowBattTime
lcUpsConfigAutoRestart
lcUpsOverloadWarningTrap
lcUpsOverloadShutdownTrap
lcUpsOnBatteryTrap
lcUpsLowBatteryWarningTrap
lcUpsLowBatteryShutdownTrap
lcUpsUtilPowerFailedTrap
lcUpsUtilPowerRestoredTrap
lcUpsInputOverVoltageTrap
lcUpsOverTempWarningTrap
lcUpsOverTempShutdownTrap
lcUpsAlarmTrap
lcUpsOutputOffTrap
lcUpsOutputOffWarningTrap
lcUpsOutputOnTrap
lcUpsOutputOnWarningTrap
lcUpsUnixShutdownTrap
lcUpsUnixShutdownWarningTrap
lcUpsInputFreqErrorTrap
lcUpsOutputOverVoltageTrap