User manual

Nform Monitoring—Navigation Tree

12.2.2 HTML control tab (selected devices only)

The HTML control tab allows you to take actions such as testing a UPS battery or turning an SNMP

device on or off. This tab appears only for certain devices with Web-enabled SNMP cards.

To use the HTML control tab:

• Log on as either Administrator or Power User.

• Click on Nform’s Navigate tab.

• In the left side of the window, click on the device you wish to view.

• In the right pane, click on the HTML control tab.

• In the center of the window, click on a control operation—for example, Alarm Silence.

• A window asks for the SNMP card user name and password. Enter the user name and password

and click OK.

• The example below shows the Alarm Silence control function for an HTML-supported UPS.

NOTE

The Control feature may not be available on every HTML-supported device.

Nform displays information

for selected control

operation and device

Highlight device name,

then click on control operation—

for example, “Alarm Silence”