User manual

Getting Started With Nform
17
8.4 Change the Administrator Password
The software has two users, Administrator and Power User. The Administrator has full access to con-
figuration and monitoring; the Power User has viewing privileges only. These user names cannot be
changed.
The default password for both users is liebert (all lowercase letters). Liebert recommends changing
the password for the Administrator for security purposes. The password is case-sensitive and may
consist of up to eight characters—any combination of letters, numbers or symbols.
To change the Administrator password:
Log on as Administrator.
Click on the Configure tab.
In the left side of the window, click on Local Users and Groups, and then on Users.
In the right side of the window, double-click on Administrator to open the Change Password
box.
Enter the new password in the Password box. The password is case-sensitive and may be up to
eight characters long (any combination of letters, numbers and other characters).
Confirm the new password by re-entering it in the Verify Password box.
•Click OK.
Follow the same procedure if you wish to change the Power User password. You must be logged on as
Administrator to change this password.
You may set up different views in the Navigate tab for each user. See 9.3 - Add Devices to Naviga-
tion Tree for details.