Specifications

STARTUP and OPERATION
4.5 µ CEM Factory and User Settings
A µCEM Factory and User Settings files are available for use by µCEM technicians to
set parameters in the µCEM or a qualified customer technician.
µCEM Settings are separated into two files: Factory Settings and User Settings. Factory
Settings should be modified by a Rosemount technician only. Note: Some parameters in
this file, if set incorrectly, may cause permanent damage to hardware.
User Settings can be modified by a qualified customer technician. User settings are
accessible through the User Settings Web screen. See section 4.7 for details on
access. Settings files are formatted as a standard Windows INI files. File is organized
in sections (in square brackets). Configuration Parameters are presented in “Name =
Value” format. Comments start with semicolon. User Settings files has three sections
[General], [Stream 1] and [Stream 2].
The list of some settings is shown in Table 4.3 & Table 4.4.
Consult a Rosemount factory person for details.
Rosemount Analytical µCEM Continuous Analyzer Transmitter 4-4