Specifications

STARTUP and OPERATION
4.3.8 Auto Calibration
The Auto Calibration dialog is displayed whenever calibration is in process. It displays
the current emission values and the status of the calibration. The calibration may be
canceled before it completes by pressing the Cancel button.
Figure 4.22 - Auto Calibration Status Screen
Figure 4.10 - Manual Calibration Results
Note: The title of this dialog will
read either “Auto Calibration” or
“Manual Calibration” to indicate
how the calibration process was
initiated.
Use the scrollbar
to see the full set
of results
Rosemount Analytical µCEM Continuous Analyzer Transmitter 4-1