Specifications

INSTALLATION
3.3.4.4 COM Interface Connector (J3) – Pocket PC external connection
The COM Interface connector has a shell size of 10, 13 contacts. Each pin will accept a wire
size of 28, 26, or 24 AWG. Connector and 3’ pigtail by Rosemount.
SIGNAL NAME DEFINITION PIN
DCD (pin 1)
Data Carrier Detect Input, RS232
1
DSR (pin 6)
Data Set Ready Input, RS232
2
RxD (pin 2)
Receive Data Input, RS232
3
RTS (pin 7)
Request to Send Output, RS232
4
TxD (pin 3)
Transmit Data Output, RS232
5
CTS (pin 8)
Clear To Send Input, RS232
6
DTR (pin 4)
Data Terminal Ready Output, RS232
7
RI (pin 9)
Ring Indicator Input, RS232
8
GND (pin 5) Signal Ground, RS232 9
TxD/RxD+ (pin 2)
RS-485 Bidirectional Data
10
TxD/RxD- (pin 7)
RS-485 Bidirectional Data
11
GND (pin 3)
Signal Ground
12
VCC
+5V DC
13
Table 3-3. COM Interface Terminal Assignments
3.3.4.5 Lan Interface Connector (J4) – Customer PC, network or laptop connection
The Lan Interface connector has a shell size of 8, 6 contacts. Each pin will accept a wire size
of 28, 26, 24, or 22 AWG.
SIGNAL NAME DEFINITION PIN
TxD+ (pin 1) 1
TxD- (pin 2)
Transmit Data
2
RxD+ (pin 3) 3
RxD- (Pin 6)
Receive Data
4
Not Used
5-6
Table 3-4. LAN Interface Terminal Assignments
3.3.4.6 CPU I/O Interface Connector (J2) – Rosemount Factory trained port for
communication with CPU hard drive
The CPU I/O Interface connector has a shell size of 14, 19 contacts. Each pin will accept a
wire size of 28, 26, or 24 AWG.
PIN NAME DESCRIPTION
A RED RED CENTER
B GND RED SHIELD
C GREEN GREEN CENTER
D GND GREEN SHIELD
E BLUE BLUE CENTER
F GND BLUE SHIELD
G HSYNC GREY CENTER
H GND GREY SHIELD
Rosemount Analytical µCEM Continuous Analyzer Transmitter 3–1