Specifications

SOFTWARE
6.4 µ CEM Pocket PC Connection Failure
In the event of the connection with the µCEM failed, a connection failure dialog will be
displayed. It will display the following message.
Connection with µCEM Lost, Retrying…
A Cancel button will be displayed. The µCEM software will continue to attempt to
reconnect with the µCEM indefinitely and will stop when a connection is made or the
cancel button is pressed.
If the Cancel button is pressed, any setting changes that were made without pressing
OK to accept will be lost. If Auto Calibration was in process, it will be completed by the
µCEM even though the connection was lost.
Rosemount Analytical µCEM Continuous Analyzer Transmitter 6-3