Specifications

MAINTENANCE and SERVICE
ETSI - FCC part 15B, CE, ETS 300 328, ETS 300 826, C-Tick (Australia)
Physical
Specification:
PC Card: PCMCIA Type II PC Card
PCI: 32-bit, 5V Key, Full Plug-N-Play
Antenna(s):
Integrated: Printed dual diversity
External: 2.2dBi dipole; additional options for specific installation needs
5.6.8 500 Watts Power Supply
The 500 Watts power supply combine high performance midrange power with high
power density (4.4 watts/in
3 ),active Power Factor Correction (PFC) and high reliability
to meet the requirements of commercial and industrial systems. Providing tightly
regulated DC power, the power supply delivers full output performance with only 300
Linear Feet per Minute (LFM) forced air-cooling by utilizing a factory installed fan. Other
features include remote sense, power fail, logic level inhibit, DC power good. Main
channel current sharing is provided for redundant applications. The power supply is
approved to the latest international regulatory standards, and displays the CE Mark.
Figure 5-15. 500 Watts Power Supply
5.6.8.1 FEATURES
• Power Factor Correction (PFC) Meets EN61000-3-2
• Fully Regulated Outputs
• Remote Sense
• Current Share, Power Fail, and Power Good Signals
• Overtemperature, Overvoltage, and Overcurrent Protected
• Available with Metric or SAE Mountings
• Input Transient & ESD Compliance to EN61000-4-2/-3/-4/-5
Rosemount Analytical µCEM Continuous Analyzer Transmitter 5-3