Installation Manual

NetSure™ LMS Data Processing Unit
Installation Instructions, Section 5879 (Issue BA, April 7, 2014)
Spec. No: 58650500, 586505500 Code: Section 5879
Model No: LMS1000 Issue BA, April 7, 2014
[15 of 149]
Figure 6. Jumper Location, Four Output (Form-C) Relay Circuit Card, P/N 506335
J1
To disable the commands SET RLY and CLR RLY,
place the jumper provided on the two pins of J1.
To enable the commands SET RLY and CLR RLY,
remove the jumper from the two pins of J1.
The jumper may be stored on ONE of the pins.
TB1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
506335