Installation Manual

NetSure™ LMS Data Processing Unit

Installation Instructions, Section 5879 (Issue BA, April 7, 2014)

Spec. No: 58650500, 586505500 Code: Section 5879

Model No: LMS1000 Issue BA, April 7, 2014

[145 of 149]

Setting Alarm Class Names

If Alarms are to be classified by the Alarm Class feature, enter a name for each of the available Alarm Classes.

Procedure:

1. After logging onto the system, type

SET CLASS

. Then press

ENTER

Command <6>: SET CLASS

Programmable Alarm Classifications

K1.none K2.none K3.none K4.none K5.none K6.none K7.none K8.none

2. Type the number of the Alarm Class to be named (

, then press

ENTER

Which alarm class(K1-8) ?

3. Type the name of the Alarm Class(5 characters maximum), then press

ENTER

Note:

To delete a name, just enter a

SPACE

then

press

ENTER

Alarm Class Name:

4. Repeat this procedure to name the other Alarm Classes.