Installation Manual

NetSure™ LMS Data Processing Unit
Installation Instructions, Section 5879 (Issue BA, April 7, 2014)
Spec. No: 58650500, 586505500 Code: Section 5879
Model No: LMS1000 Issue BA, April 7, 2014
[135 of 149]
CONFIG L_
Note:
If "Y" was entered above, the
system responds with...
Enter Program Line:
Type the program line (79 characters maximum) which determines
when the LED illuminates, then press
ENTER
. Refer to the beginning of
this section for a discussion on program lines.
Note:
When the LMS1000 is used in a 582140000, 582140001,
and 582126100 NETSURE Power System that
communicates to the LMS1000 using the LISP port option,
channel L7 is dedicated to provide an ‘External Fuse
Alarm’ indication and channel L8 is dedicated to provide an
‘External AC Fail Alarm’ indication to the Power System
MCA. Any state generated by the program lines of these
channels will be passed to the MCA as an ‘External Fuse
Alarm’ and an ‘External AC Fail Alarm’ indication
respectively.