Data Sheet

2
EmersonNetworkPower.com/EnergySystems (North America)
EmersonNetworkPower.eu/EnergySystems (EMEA)
© Emerson Network Power Energy Systems North America 2014.
Business-Critical Continuity
™
, Emerson Network Power
™
, the Emerson Network Power logo, Emerson
®
and Consider it Solved are service marks and
trademarks of Emerson Electric Co. EnergyMaster
™
, eSure
™
, NetPerform
™
, NetReach
™
, NetSpan
™
, NetSure
™
and NetXtend
™
are trademarks of Emerson
Network Power Energy Systems North America. Any other product, brand, or company names or logos are the property of the respective owner.
While every precaution has been taken to ensure accuracy and
completeness herein, Emerson Electric Co. assumes no responsibility,
and disclaims all liability, for damages resulting from use of this
information or for any errors or omissions. Specifications subject to
change without notice.
007DRA-LMS1000 / 0114
LMS1000
Specifications
Main Chassis
Dimensions (H x W x D) 3.5" (2U) x 17" x 13.5"
Mounting 19" or 23" relay rack
Power +24 VDC or -48 VDC
Wiring Accessible from the front
CPU Flash downloadable, 8 user defined LEDs, watchdog circuit
I/O card cage Holds up to 10 user selectable cards
Local Display
VFD
4 line by 23-character display with 12 key keypad. Local access to channel values,
alarm and event logs, statistics and battery discharge information.
Input/Output Cards
4-input analog
Transformer isolated, high precision (15-bits), bipolar, general purpose input card for sensing current loop transducers
(e.g. 4–20 mA) and voltages from shunts (mV) up to 60 VDC. Accuracy of each input is better than 0.1%.
8-input temperature
Input card utilizes digital temperature sensor technology having ± 0.5 °C resolution.
Sensors are available in a 1/4" or 5/16" single hole lug.
8-input shunt (8) common return 0 mv to 50 mv DC inputs
12-input battery cell (12) 0 V to 5 V analog inputs
4-output relay Form-C contacts for each output rated at 0.5 A at 110 VDC and 2.0 A at 30 VDC
4-input binary Double-ended, optically isolated inputs (60 VDC Max)
8-input binary Single-ended, optically isolated inputs accept either plus or minus battery (60 VDC maximum), individually selectable by a jumper.
Communications
RS232
Local craft port provides complete access for programming and querying using any standard terminal software.
Command set is similar to DGU and Vortex Smart, therefore no special communications software is required.
Ethernet port
Fully integrated 10 Base-T Ethernet connection. Unlike other Ethernet solutions that employ a 3rd party serial port converter, the
LMS1000 Ethernet port is derived directly from the main processor. This approach ensures the fastest remote communications when
compared to conventional serial port converter speeds like 9600 bps.
56K modem An optional modem plugs onto the CPU motherboard and provides remote access connection identical to local craft port.
TL1 TL1 capability over X.25 or IP. All 36 commands of the Telcordia TA-1360 are supported.
SNMP Query using a standard SNMP MIB-Browser or issue SNMP traps for alarm reporting.
E-mail Standard feature, configurable to report alarms and data via e-mail messages.
Multitasking All four ports may be accessed at the same time.
Software Highlights
Digital power ready
When used in conjunction with a digital power system such as Lorain
®
or Vortex
®
, a simple communications link between the two
provides the ultimate in low-cost monitoring. Hundreds of I/O points inside the digital power system are automatically mapped over
to the LMS1000 providing a seamless monitoring solution. In addition, all advanced voltages) are made available, thus providing full
remote control capability to the power plant.
Function channels Use these 64 virtual channels to perform calculations such as total plant current, power, battery current/voltage imbalance, etc.
Remote upgrades Future upgrades to the software can be done remotely over Ethernet or modem.