Application Guide

SAG586505000 System Application Guide
SAG586505500 Spec. No. 586505000 (Model LMS1000)
Issue AZ, April 7, 2014 Spec. No. 586505500 (Model LMS1000)
Page 52 of 62
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
5.4.4 Input State: An applied voltage of 12 to 60 volts, DC, is defined as the CC (contact
closed) state. An applied voltage of 2.0 volts or less is defined as the CO (contact
open) state. Voltages between 2.0 and 12 volts are undefined.
5.4.5 Alarm State: Either the CC or CO state may be configured as the alarm state.
5.5 Eight (8) Input Binary Circuit Card, Part No. 506334
5.5.1 General: Adds eight (8) binary inputs to the system. Single-ended input connections.
5.5.2 Maximum Input Voltage: 60 volts DC.
5.5.3 Channel-to-Channel Isolation: 60 volts, maximum.
5.5.4 Input State: An applied voltage of 12 to 60 volts, DC, is defined as the CC (contact closed)
state. An applied voltage of 2.0 volts or less is defined as the CO (contact open) state.
Voltages between 2.0 and 12 volts are undefined.
5.5.5 Alarm State: Either the CC or CO state may be configured as the alarm state.
5.6 Four (4) Output Form-C Relay Circuit Card, Part No. 506335
5.6.1 General: Adds four (4) Form-C relay output contacts to the system.
5.6.2 Relay Contacts: 4 sets.
5.6.3 Contact Arrangement: Form-C.
5.6.4 Contact Rating: Contacts are rated for 0.6A at 125 VAC, 0.5A at 110 VDC, 2.0A at 30 VDC.
5.6.5 Channel-to-Channel Isolation: 177 volts, maximum.
5.7 Eight (8) Input Temperature Circuit Card, Part No. 506333
5.7.1 General: Adds eight (8) temperature inputs to the system.
5.7.2 Accuracy: ±0.5°C, from -10°C to +85°C.
Home