Application Guide

SAG586505000 System Application Guide
SAG586505500 Spec. No. 586505000 (Model LMS1000)
Issue AZ, April 7, 2014 Spec. No. 586505500 (Model LMS1000)
Page 50 of 62
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
3. 586505000/586505500 LMS1000 EXPANSION CABINET
3.1 Input Ratings
3.1.1 Input Voltage Range: 20 - 60 Volts DC.
3.1.2 Maximum Input Current: 0.7 Amperes.
3.2 Mounting
3.2.1 586505000 List 6: Furnished reversible mounting angles permit mounting in a 19" or 23" wide
relay rack with 1" or 1-3/4" multiple drilling. 586505000 and 586505500 List 7: Furnished
mounting angles permit mounting in a 23" wide relay rack with 1" or 1-3/4" multiple drilling.
3.2.2 Mounting angles may be re-positioned for flush front mounting, 5-inch front projection
mounting, or 6-inch front projection mounting.
3.3 I/O Circuit Card Mounting Positions
3.3.1 Provides for mounting of any combination of I/O (analog, binary, relay, and temperature) circuit
cards. CARDS MUST BE LOADED LEFT TO RIGHT (AS VIEWED FROM THE FRONT OF
THE CABINET). DO NOT SKIP SLOTS.
3.3.2 Contains ten (10) I/O circuit card mounting slots.
3.4 CPU Circuit Card, Part No. 506153 (also used in 582140000, 582140001, and 582126100
Secondary Bays)
3.4.1 General: The CPU circuit card contains the LMS1000 Expansion firmware, a power supply
circuit, and communications circuits.
3.4.2 Processor: TMPN3150 - 10MHz.
3.4.3 SRAM - Data: 32K bytes.
3.4.4 Flash - System: 128K bytes.
3.4.5 LMS1000 Network Ports: Four RJ-45 jacks are provided for interconnecting Expansion
Cabinets and Expansion Assemblies into the LMS1000 network.
3.4.6 Controls and Indicators: The following controls and indicators are provided on the CPU
circuit card. Refer to the Operating Chapter in the User Instructions (Section 5847) for
descriptions and locations.
(A) One Power On LED Indicator
(B) One CPU Fail LED Indicator
(C) One CPU Hardware Reset Pushbutton Switch
4. 586505000/586505500 LMS1000 EXPANSION ASSEMBLY
4.1 Input Ratings
4.1.1 Input Voltage Range: 20 - 60 Volts DC.
4.1.2 Maximum Input Current: 0.2 Amperes.
4.2 Mounting
4.2.1 Customer mounted. See "Overall Dimensions (Expansion Assembly)" under PHYSICAL SIZE
INFORMATION section for details.
4.3 I/O Connector Pinouts
4.3.1 See "Connector Locations (Expansion Assembly)" under PHYSICAL SIZE INFORMATION.
4.4 CPU Circuit, P/O Part No. 507606
4.4.1 General: The CPU circuit contains the Expansion Assembly's firmware, a power supply circuit,
and communications circuits.
4.4.2 Processor: TMPN3150 - 10MHz.
4.4.3 SRAM - Data: 32K bytes.
4.4.4 Flash - System: 128K bytes.
4.4.5 Analog Inputs: Provides twenty-four (24) 50mv shunt inputs. ±0.1% from -40°C to +65°C.
Home
Home