Application Guide

SAG586505000 System Application Guide
SAG586505500 Spec. No. 586505000 (Model LMS1000)
Issue AZ, April 7, 2014 Spec. No. 586505500 (Model LMS1000)
Page 46 of 62
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
2.5.2 Provides read only access to view plant voltage and load current, view active alarms,
perform channel scans, view the Events Log and Alarm Log, view channel statistics,
and view battery discharge history.
2.5.3 Requires LMS1000 firmware version 5.0.0 or later.
2.5.4 List 60 and List 62 require I/O card slot #10. List 61 and List 63 use an interconnect harness in
lieu of the 10th I/O slot.
2.5.5 Not for use in Spec. Nos. 582140000, 582140001, and 582126100 Power Systems.
2.6 Optional Modem Circuit Card, Part No. 508951
2.6.1 General: Provides for remote communications at 56K bps.
2.6.2 Compatible with CCITT V.22, Bell 212A, and Bell 103 standards.
2.6.3 DTMF and pulse dialing.
2.6.4 FCC Part 68 Registered.
2.6.5 Theory of Operation
Refer to Figure 1 for a flow diagram depicting modem operation.
Note: Additional features (i.e. error control, data compression, etc.) supported by remote
modem must be deactivated. Refer to operating manual supplied by modem
manufacturer.
Home