Application Guide

System Application Guide SAG586505000
Spec. No. 586505000 (Model LMS1000) SAG586505500
Spec. No. 586505500 (Model LMS1000) Issue AZ, April 7, 2014
Page 35 of 62
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
• View NPS System High Temperature Alarm #1 Setting
• View NPS System High Temperature Alarm #2 Setting
• View NPS System Low Temperature Alarm #1 Setting
• View NPS System Low Temperature Alarm #2 Setting
• View NPS NAG Minutes (Audible Alarm Cutoff Reset Time Period) Setting
• View NPS Manual Test/Equalize Time Setting
• View NPS Relay Test Time Setting
• View NPS Auto Equalize Time Multiplier Setting
• View NPS Temperature Compensation Slope Setting
• View NPS Temperature Compensation Maximum Voltage Setting
• View NPS Temperature Compensation Minimum Voltage Setting
• View NPS Inventory
Available to Indicated LMS1000 Users via the SET NPS Commands
LMS1000 Users with Access to Level 4 Commands
• Set NPS NAG Minutes (Audible Alarm Cutoff Reset Time Period)
LMS1000 Users with Access to Level 5 Commands
• Set NPS System Battery On Discharge Alarm Setting
• Set NPS System Voltage is Very Low Alarm Setting
• Set NPS System High Voltage Alarm #1 Setting
• Set NPS System High Voltage Alarm #2 Setting
• Set NPS System Total Load Current Alarm Setting
• Set NPS System Group A Load Current Alarm Setting
• Set NPS System Group B Load Current Alarm Setting
• Set NPS Relay Test Time Setting
• Set NPS System High Temperature Alarm #1 Setting
• Set NPS System High Temperature Alarm #2 Setting
• Set NPS System Low Temperature Alarm #1 Setting
• Set NPS System Low Temperature Alarm #2 Setting
• Set NPS System Power Share Capacity Setting
LMS1000 Users with Access to Level 6 Commands
• Set NPS System Operating Mode (Float or Test/Equalize)
• Turn any Installed NPS PCU On or Off (TR Feature)
• Set NPS MCA Remote Access Password
• Set Custom Text Messages for NPS Elements
• Set NPS System Float Voltage Setting
• Set NPS System Test/Equalize Voltage Setting
• Set NPS System High Voltage Shutdown Setting
• Set NPS System Current Limit Setting
• Perform a Relay Test
• Set NPS Manual Test/Equalize Time Setting
• Set NPS Auto Equalize Time Multiplier Setting
Home