Application Guide

SAG586505000 System Application Guide
SAG586505500 Spec. No. 586505000 (Model LMS1000)
Issue AZ, April 7, 2014 Spec. No. 586505500 (Model LMS1000)
Page 32 of 62
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Available to all LMS1000 Users via the ALARMS NETSURE Commands
• View Active VPS/NPS System Alarms
• View Active VPS/NPS Subsystem Alarms
• View Active VPS/NPS MCA Alarms
• View Active VPS/NPS Shunt Alarms
• View Active VPS/NPS LVD Alarms
Available to all LMS1000 Users via the SCAN NETSURE Commands
• View VPS/NPS System Status and Alarms…
System Output Voltage
Total System Output Current
Individual System Output Currents (individual shunts)
Temperature Probe Values and Alarm Status
System Alarms (includes PCU and Temperature Probe alarms)
• View VPS/NPS Subsystem Status and Alarms (if installed)…
Subsystem Output Voltage
Total Subsystem Output Current
Individual Subsystem Output Currents (individual shunts)
Subsystem Alarms
• View VPS/NPS PCU Status…
Total PCU Current
Individual PCU Currents
• View VPS/NPS Battery Status and Alarms (if battery Shunt PODs installed)…
Total Battery Current
Individual Battery Currents
Battery Alarms
• View VPS/NPS MCA Alarms
• View VPS/NPS LVD Alarms
Available to LMS1000 Users with Access to Level 2
Commands via the PRCONFIG NETSURE Commands
• View VPS/NPS Settings…
System Float Voltage
System Test/Equalize Voltage
System High Voltage Alarm #1
System High Voltage Alarm #2
System Battery On Discharge Alarm
System 50% Battery On Discharge Alarm
System High Voltage Shutdown
System Overcurrent Alarm
System Current Limit
System Output Voltage Calibration Reading
NAG Minutes (Audible Alarm Cutoff Reset Time Period)
Battery Charge Temperature Compensation Module's Calibration Voltage
Subsystem High Voltage Alarm (if installed)
Subsystem Low Voltage Alarm (if installed)
Subsystem Output Voltage Calibration Reading (if installed)
Subsystem Overcurrent Alarm (if installed)
Battery Overcurrent Alarm
Auto Equalize Multiplier
Digital Temperature Compensation Slope
Digital Temperature Compensation Maximum Voltage
Home