Application Guide

System Application Guide SAG586505000
Spec. No. 586505000 (Model LMS1000) SAG586505500
Spec. No. 586505500 (Model LMS1000) Issue AZ, April 7, 2014
Page 23 of 62
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
ACCESSORY DESCRIPTIONS
In-Line Fuse Kit, P/N 535135
Features
♦ Provides one (1) in-line fuse (1A) pigtail assembly with a butt splice on one end and the other end
unterminated (a butt splice, 1/4” ring lug, and 3/8" ring lug are provided loose to be crimped on the
unterminated end as required).
♦ Used to protect analog inputs as described under List 20 and List 23 description.
Ordering Notes
1) Order P/N 535135 as required.
Replacement CPU Memory
Backup Battery
Features
♦ The CPU circuit card employs a 3 volt 170 mAH lithium battery which has a shelf life of ten years. Under
typical discharge conditions (25 degrees C), the battery can power the memory for about 5000 hours.
♦ When the lithium battery reaches approximately 2.5 volts; a local indicator illuminates, the Hardware
Failure contacts on the Main CPU card change state, and the firmware generates a Self Diagnostic Error.
When this happens it means the lithium battery, under typical conditions, will be able to power the
memory for about another ten days.
Restrictions
Emerson Network Power recommends that the memory backup battery be replaced once a year.
Ordering Notes
1) Order Part No. 241163100.
LMS1000 Network Cables
Features
♦ Cables to connect the 586505000/586505500 Main Cabinet, 586505000/586505500 Expansion Cabinets,
and 586505000/586505500 Expansion Assemblies into the LMS1000 Network.
Restrictions
In Spec. Nos. 582140000, 582140001, and 582126100 Power Systems; order cable options per
SAG582140000, or SAG582140001, or SAG582126100.
Ordering Notes
1) Cable options include a standard length cable as specified in a), or a customer specified length of cable
as specified in b). The customer must assemble the cable specified in b).
a) Standard Length Cable:
Part No. 421842700, a 6 foot long cable terminated at both ends with an RJ-45 plug.
Part No. 509900, a 4 foot long cable terminated at both ends with an RJ-45 plug.
b) Cable Only: Part No. 156202100, a category 5, four twisted pair conductor, 24 AWG solid copper
cable. Specify length in 5 feet increments (cable is provided uncut). Also order termination kit
specified in c).
c) Cable Termination Kit: Part No. 483589500, consists of two RJ-45 plugs.
Home