Application Guide

System Application Guide SAG586505000
Spec. No. 586505000 (Model LMS1000) SAG586505500
Spec. No. 586505500 (Model LMS1000) Issue AZ, April 7, 2014
Page 21 of 62
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
♦ Can also be used to protect binary inputs as described under List 30 and 31 description.
Ordering Notes
1) Order as required.
List BC: Current Limit Resistor Kit
Features
♦ Provides one (1) 49.9 Ohm resistor pigtail assembly with 5/16" ring lug.
♦ Used to protect analog inputs as described under List 20 and List 22 description.
♦ Can also be used to protect binary inputs as described under List 30 and 31 description.
Ordering Notes
1) Order as required.
List BE: In-Line Fuse Kit
Features
♦ Provides one (1) in-line fuse (1A) pigtail assembly with a 3/8" ring lug.
♦ Used to protect analog inputs as described under List 20 and List 23 description.
Ordering Notes
1) Order as required.
List BF: In-Line Fuse Kit
Features
♦ Provides one (1) in-line fuse (1A) pigtail assembly with a 5/16" ring lug.
♦ Used to protect analog inputs as described under the List 20 and List 23 descriptions.
Ordering Notes
1) Order as required.
List ST: Temperature Sensor
Features
♦ Provides one (1) temperature probe to be used with the List 21 temperature input circuit card.
♦ Mounts to a 5/16 or M8 stud.
Restrictions
LMS1000 Temperature Probe Wire Specifications:
• Preferred wire is P/N 1562077, 18 Ga. solid twisted pair, maximum length is 200 feet.
• Optional wire is P/N 1562001, 20 Ga. shielded twisted pair (shield grounded at one end), maximum
length is 100 feet.
Ordering Notes
1) Order List ST as required.
List SU: Temperature Sensor
Features
♦ Provides one (1) temperature probe to be used with the List 21 temperature input circuit card.
♦ Mounts to a 1/4 or M6 stud.
Home