Application Guide

SAG586505000 System Application Guide
SAG586505500 Spec. No. 586505000 (Model LMS1000)
Issue AZ, April 7, 2014 Spec. No. 586505500 (Model LMS1000)
Page 20 of 62
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Restrictions
Must be assemble by the customer.
Not for use in Spec. Nos. 582140000, 582140001, and 582126100 Power Systems.
Ordering Notes
1) Order multiple List 92 as required. Each List 92 provides 5 feet of cable. When ordering multiple List 92,
cable is provided uncut.
2) Order cable termination kit per List 93.
List 93: MCA Interface Cable Termination Kit
Features
♦ Consists of one RJ-45 plug, one 9-pin male D-type plug, four snap-in crimp type contacts, and one cable
clamp assembly kit.
♦ See also List 94.
Restrictions
Must be assembled by the customer.
Not for use in Spec. Nos. 582140000, 582140001, and 582126100 Power Systems.
Ordering Notes
1) Order one (1) List 93 if cable ordered per List 92.
2) Order cable per List 92.
List 94: MCA Interface Cable, Pre-assembled
Features
♦ Cable connects between the MCA of a Vortex Power System (VPS) or NETSURE Power System (NPS)
and the 586505000/586505500 Main Cabinet.
♦ 6' long pre-assembled cable.
♦ See also Lists 92 and 93.
Restrictions
Not for use in Spec. Nos. 582140000, 582140001, and 582126100 Power Systems.
Ordering Notes
1) Order one (1) List 94 (a six-foot cable terminated at one end with an RJ-45 plug, and at the other end with
a 9-pin male D-type plug). Note: Another cable option would be P/N 500819 which is a 1.75' cable
terminated at one end with an RJ-45 plug, and at the other end with a 9-pin male D-type plug.
List BA: Current Limit Resistor Kit
Features
♦ Provides one (1) 49.9 Ohm resistor pigtail assembly with a 3/8" ring Iug.
♦ Used to protect analog inputs as described under List 20 and List 22 description.
♦ Can also be used to protect binary inputs as described under List 30 and 31 description.
Ordering Notes
1) Order as required.
List BB: Current Limit Resistor Kit
Features
♦ Provides one (1) 49.9 Ohm resistor pigtail assembly with a splice connection.
♦ Used to protect analog inputs as described under List 20 and List 22 description.
Home