Application Guide

SAG586505000 System Application Guide
SAG586505500 Spec. No. 586505000 (Model LMS1000)
Issue AZ, April 7, 2014 Spec. No. 586505500 (Model LMS1000)
Page 2 of 62
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
• LMS1000 is capable of reporting alarm conditions via SNMP traps over Ethernet
or via TL1 (over Ethernet) when the 'TL1 over Ethernet' option is ordered. TL1
is also available via a serial connection in 'direct mode'.
• The Main CPU circuit card provides programmable LEDs to allow local indication of alarm
conditions or occurrences. For remote indication, the Main and/or Expansion Cabinets
can be equipped with output circuit cards which provide programmable relays. These
relays may also be used to control other equipment.
• LMS1000 easily interfaces with the MCA of Vortex
®
Power Systems (VPS) and
NetSure™ Power Systems (NPS). This interface allows an LMS1000 user to remotely
monitor, adjust, and control the Power System via LMS1000; plus easily use the features
of LMS1000 with the Power System. Separate analog, binary, and relay circuit cards do
not have to be supplied for this interface. Analog, binary, relay, and temperature circuit
cards (I/O cards) can be provided to monitor equipment external to the Power System. In
a VPS/NPS, one simple cable connection between the Main Cabinet and the VPS/NPS
completes the interconnections required. Note that the LMS1000 is factory integrated
into Spec. Nos. 582140000, 582140001, and 582126100 NetSure Power Systems.
Note that Spec. Nos. 582140000, 582140001, and 582126100 NetSure Power
Systems do not use the LMS1000 Cabinets. The LMS1000 is factory integrated into
the Power Systems. Note that LMS1000 I/O circuit card mounting positions are
provided inside a 582140000, 582140001, and 582126100 NetSure Power System.
• LMS1000 can be accessed via a local port, a modem port (when optional modem is
ordered), an optional TL1 port, and an Ethernet port (for Telnet access, Web access,
SNMP access, optional TL1 access, and Email alarm reporting). A local front panel
display option is also available.
• Available software options include…
Power Metering
Energy Management*
Rectifier/PCU Sequencing*
TL1/X.25
TL1 (over Ethernet)
Gateway Port
LMS Dual MCA Interface
* Note: LMS1000 Energy Management and Sequencing features are not for use in the
Spec. Nos. 582140000, 582140001, and 582126100 Power Systems.
• Available specialty interfaces include…
Door Access Controller Interface
External GPS Modem Interface
AC Analyzer Interface
Home