Application Guide

SAG586505000 System Application Guide
SAG586505500 Spec. No. 586505000 (Model LMS1000)
Issue AZ, April 7, 2014 Spec. No. 586505500 (Model LMS1000)
Page 18 of 62
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Restrictions
Besides the energy management software option, LMS1000 requires dedicated analog, binary, and
relay (traditional rectifiers only) inputs/outputs to manage the power plant. See the Wiring section of the
Installation Instructions (Section 5879).
The LMS1000 Energy Management feature is not for use in Spec. Nos. 582140000, 582140001, and
582126100 Power Systems.
Ordering Notes
1) Order List 83 if PCU/Rectifier Energy Management is required.
2) Order analog, binary, and relay circuit cards as required when used with 'traditional rectifiers'.
List 84: External GPS Modem Interface
Features
♦ Provides access to the LMS1000 via an external GPS Modem.
♦ Refer to the "Specifications" section of this document for further information.
Restrictions
Interfaces to an Enfora GPS External Modem only.
External Modem Port is provided via the LMS1000 OEM2 Port. CANNOT be used if List 60, 61, 62, or 63
ordered.
Not for use in Spec. Nos. 582140000, 582140001, and 582126100 Power Systems.
Ordering Notes
1) Order List 84 as required.
List 85: AC Analyzer Interface
Features
♦ LMS1000 reads and records values from the AC Analyzer.
♦ Refer to the "Specifications" section of this document for further information.
Restrictions
Interfaces to a Dossena AC Analyzer Model MV3DL only.
AC Analyzer Port is provided via the LMS1000 OEM1 Port. CANNOT be used if List 79, List 86, or List 88
ordered.
Not for use in Spec. Nos. 582140000, 582140001, and 582126100 Power Systems.
Ordering Notes
1) Order List 85 as required.
List 86: TL1/X.25 Software Option
Features
♦ Provides a TL1/X.25 Interface and RS-232 Port with PAD support.
♦ Refer to the "Specifications" section of this document for further information.
Restrictions
TL1/X.25 Port is provided via the LMS1000 OEM1 Port. CANNOT be used if List 79, List 85, List 88, or List
90 ordered.
Not for use in Spec. Nos. 582140000, 582140001, and 582126100 Power Systems.
Ordering Notes
1) Order List 86 if TL1/X.25 is required (see also List 90 for another TL1 option).
Home
Home