Application Guide

ManualsBrandsEmerson ManualsDC PowerEmerson LMS 1000

SAG586505000

SAG586505500

System Application Guide

Spec. No. 586505000 (Model LMS1000)

Spec. No. 586505500 (Model LMS1000)

Issue AZ, April 7, 2014

Page 1 of 62

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy

Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.

SYSTEM OVERVIEW

Description: A programmable monitoring, controlling, and data acquisition system designed for use in

telecommunications power sites.

• Consists of a Main Cabinet which holds up to ten input/output circuit cards, in a cabinet

size that occupies two 19" or 23" relay rack spaces. For system expansion and/or to

monitor points at other locations, Supplemental (Expansion) Cabinets are available.

Each Expansion Cabinet holds up to ten input/output circuit cards, in a cabinet size that

occupies two 19" or 23" relay rack spaces. Also available are Expansion Assemblies

which provide an input circuit card equipped with a fixed number of analog and binary

input points in a sheet metal housing. These assemblies can be mounted inside

customer equipment. The Main Cabinet, Expansion Cabinets, and Expansion

Assemblies are interconnected via the LMS1000 network.

• The Main Cabinet and Expansion Cabinets can be equipped with various input circuit

cards to monitor a variety of analog, binary, and temperature points. The Expansion

Assemblies are always equipped with an input circuit card to monitor a fixed number of

analog and binary points.

• LMS1000 collects data from the input circuit cards. The data collected is used for alarm

processing and reporting, and to provide statistics.

• LMS1000 is capable of reporting alarm conditions to a remote terminal, pager, or Email

address. For remote terminal or pager notification, the Main CPU circuit card must be

equipped with the optional modem. Two types of alarm reporting mechanisms are

provided, System Alarm Reporting and Individual User Alarm Reporting.

Home

Expansion Assembly

Main Cabinet

(Expansion Cabinet Similar)

Summary of content (62 pages)

PAGE 1
SAG586505000 SAG586505500 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Issue AZ, April 7, 2014 Home SYSTEM OVERVIEW Description: A programmable monitoring, controlling, and data acquisition system designed for use in telecommunications power sites. • Consists of a Main Cabinet which holds up to ten input/output circuit cards, in a cabinet size that occupies two 19" or 23" relay rack spaces.
PAGE 2
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home • LMS1000 is capable of reporting alarm conditions via SNMP traps over Ethernet or via TL1 (over Ethernet) when the 'TL1 over Ethernet' option is ordered. TL1 is also available via a serial connection in 'direct mode'. • The Main CPU circuit card provides programmable LEDs to allow local indication of alarm conditions or occurrences.
PAGE 3
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Family: Spec. No.: Model: Agency Approval: Framework Type: Mounting Width: Mounting Depth: Mounting Height: Access: Color: Environment: NetSure™ 586505000 and 586505500 LMS1000 UL Recognized to UL 1950 CSA 22.2, No.
PAGE 4
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 5
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 6
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) TABLE OF CONTENTS System Overview Picture List Descriptions Accessory Descriptions Specifications Physical Size Information Related Documentation SYSTEM OVERVIEW................................................................................................................................................. 1 TABLE OF CONTENTS .............................
PAGE 7
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) 130VDC Monitoring Wire Harness ................................................................................................................... 24 SPECIFICATIONS.................................................................................................................................................... 25 1. 586505000/586505500 LMS1000 System .........
PAGE 8
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home LIST DESCRIPTIONS List 1: Common Equipment for the LMS1000 Main Cabinet Features ♦ Provides the LMS1000 MAIN CABINET (19"/23" relay rack mounting) (off-white). Refer to the "Specifications" section of this document for further information. Restrictions Not for use in Spec. Nos. 582140000, 582140001, and 582126100 Power Systems.
PAGE 9
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) 9) Order a MCA interconnect cable if required per List 92 and List 93, or List 94. 10) Order Front Panel Display option as required per List 62 or List 63. 11) Order Accessories as required per the "ACCESSORY" section.
PAGE 10
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home List 10: Common Equipment for One (1) LMS1000 Expansion Assembly Features ♦ Provides one (1) LMS1000 EXPANSION ASSEMBLY. Refer to the "Specifications" section of this document for further information. Restrictions The Expansion Assembly analog inputs can only be used for 50mV shunts on the same discharge bus.
PAGE 11
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) List 21: Eight (8) Input Temperature Circuit Card Features Home ♦ Monitors temperature probe inputs. ♦ Each circuit card provides eight (8) temperature inputs to the system (mapped as analog channels). ♦ Refer to the "Specifications" section of this document for further information. Restrictions Not for use in Expansion Assemblies.
PAGE 12
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Restrictions Not for use in Expansion Cabinets and Expansion Assemblies. This circuit card must only be used for adjacent cells in a common battery string. The input requires the intercell connector to be the negative (–) input on one cell and the positive (+) input for the next one. This cannot be used for pilot cells in multiple battery strings.
PAGE 13
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Restrictions Not for use in Expansion Assemblies. Maximum number of binary points that can be monitored is dependent on how many open I/O slots are available in the system network and maximum number of binary channels the system supports. Each 586505000/586505500 cabinet holds up to ten (10) I/O circuit cards.
PAGE 14
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home There are two kits offered for the 19" cabinet. One kit is used with the earlier version cabinet, the other for the later version cabinet. 586505000 List 1 cabinets manufactured on or before 3/21/03, use kit P/N 524354 (586505000 List 61). 586505000 List 1 cabinets manufactured after 3/21/03, use kit P/N 524353 (586505000 List 60).
PAGE 15
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home uniform, you have the earlier version cabinet and must use kit P/N 524354 (586505000 List 61). If th the 10 I/O backplane connector is longer then the others, you have a later version cabinet that uses Kit P/N 524353 (586505000 List 60). See the above illustration. Requires LMS1000 firmware 5.0.0 or later. Requires use of the LMS1000 OEM2 Port.
PAGE 16
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) 586505000 List 63 provides a new 23" off-white front panel. 586505500 List 63 provides a new 23" gray front panel. Home List 70: Modem Circuit Card Features ♦ Provides for remote communications up to 56K BPS. ♦ An RJ-11 jack (for telephone line connection) is provided on the rear of the 586505000/586505500 cabinet. In a Spec. No.
PAGE 17
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Ordering Notes 1) Order List 79 if a Gateway Port is required. 2) If you are connecting the Gateway Port to a DGU, also order null modem cable P/N 545562 (5’) or 548010 (50’). This cable connects between the DGU and the LMS1000.
PAGE 18
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Restrictions Besides the energy management software option, LMS1000 requires dedicated analog, binary, and relay (traditional rectifiers only) inputs/outputs to manage the power plant. See the Wiring section of the Installation Instructions (Section 5879). The LMS1000 Energy Management feature is not for use in Spec. Nos.
PAGE 19
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home List 87: Power Metering Software Option Features ♦ Refer to the "Specifications" section of this document for further information. Restrictions This option must be factory installed, or field installed by Emerson Network Power only.
PAGE 20
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Restrictions Must be assemble by the customer. Not for use in Spec. Nos. 582140000, 582140001, and 582126100 Power Systems. Ordering Notes 1) Order multiple List 92 as required. Each List 92 provides 5 feet of cable. When ordering multiple List 92, cable is provided uncut. 2) Order cable termination kit per List 93.
PAGE 21
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) ♦ Can also be used to protect binary inputs as described under List 30 and 31 description. Ordering Notes 1) Order as required. Home List BC: Current Limit Resistor Kit Features ♦ Provides one (1) 49.9 Ohm resistor pigtail assembly with 5/16" ring lug. ♦ Used to protect analog inputs as described under List 20 and List 22 description.
PAGE 22
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Restrictions LMS1000 Temperature Probe Wire Specifications: • Preferred wire is P/N 1562077, 18 Ga. solid twisted pair, maximum length is 200 feet. • Optional wire is P/N 1562001, 20 Ga. shielded twisted pair (shield grounded at one end), maximum length is 100 feet. Ordering Notes 1) Order List SU as required.
PAGE 23
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home ACCESSORY DESCRIPTIONS In-Line Fuse Kit, P/N 535135 Features ♦ Provides one (1) in-line fuse (1A) pigtail assembly with a butt splice on one end and the other end unterminated (a butt splice, 1/4” ring lug, and 3/8" ring lug are provided loose to be crimped on the unterminated end as required).
PAGE 24
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home 130VDC Monitoring Wire Harness Features Cable harness to monitor 130VDC inputs via the LMS1000 List 20 Four (4) Input analog card providing a SELV input of 0-50mVDC. Restrictions Requires available input on a List 20 Four (4) Input analog card per measurement.
PAGE 25
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home SPECIFICATIONS 1. 586505000/586505500 LMS1000 SYSTEM 1.1 Environmental Ratings 1.1.1 Operating Ambient Temperature Range: -40°C to +60°C (-40°F to +140°F). 1.1.2 Storage Temperature Range: -40°C to +85°C (-40°F to +185°F). 1.1.3 Humidity: This system is capable of operating in an ambient relative humidity range of 0% to 95%, noncondensing. 1.1.
PAGE 26
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 1.4 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Software Features 1.4.1 User Interface: Users can interface with LMS1000 through the local port using a local terminal, through a modem (if optional modem installed), through the Ethernet port via a TELNET session, through the Ethernet port using a MIB browser, or through the Ethernet port over the Internet via a WEB Browser.
PAGE 27
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) designation and input/output number is identical to that of the input or output associated to it.
PAGE 28
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 29
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) 1.4.6 1.4.7 Home (high or low) can only occur if the sign of the alarm limit matches the sign of the reading value. For example, this may be used in detecting both high charge current and a high discharge current on a battery shunt. Assume a shunt is wired for a negative float current reading, and it has a high alarm limit of –6.
PAGE 30
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 1.4.8 1.4.9 1.4.10 1.4.11 1.4.12 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home The automatic log-off feature mentioned above is automatically disabled for the TL1 port. See the description of the TL1 software option. See also the description of the SNMP software feature for its alarm reporting mechanisms.
PAGE 31
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) 1.4.13 1.4.14 1.4.15 1.4.16 1.4.17 1.4.18 1.4.19 1.4.20 Home channels on a single page format. SCAN information includes the present value and alarm status of a channel, plus other pertinent information. Programmable Commands: Eight user programmable commands can be entered in the system.
PAGE 32
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 33
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Digital Temperature Compensation Minimum Voltage Battery Current Limit Relay Test Time Test/Equalize Timeout Low Voltage Disconnect "Disconnect" (for each installed LVD) Low Voltage Disconnect "Reconnect" (for all installed LVDs) Temperature Probes Alarms • Home View VPS/NPS Equipment Inventory...
PAGE 34
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 35
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 36
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 37
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) 1.5 Home (2) The "Set" community string can be set and listed. (3) The “Traps” community string can be set and listed. (4) "Trap Addresses" can be added, deleted, and listed. SNMP V1 or V2 traps can be received. The SNMP version of the traps sent are selected through software (V1 or V2). (5) "Host Addresses" can be added, deleted, and listed.
PAGE 38
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 1.5.3 1.5.4 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home format which can easily be imported into a spreadsheet for record keeping or presentation purposes. The user is responsible for translating power consumption data into dollars billed.
PAGE 39
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) 1.5.5 Home intervals until all controlled rectifiers/PCUs are operating. This prevents commercial AC power surges which could cause an overload condition possible when several rectifiers/PCUs are started simultaneously.
PAGE 40
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 1.5.6 1.5.7 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home field and the LMS1000 sub-access identifier field in all responses to TL1 commands and reports containing a TL1 access identifier field is separated by a hyphen. The use of an "AID delimiter" (a hyphen) can be enabled or disabled, as described in "Setting the TL1/X.
PAGE 41
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) System settings can be changed using one of two methods. • Home The front panel interface of the NPS main bay. The LMS detects that the setting has been changed on the NPS’s front panel and also changes the associated setting of the VPS. The LMS’s command line interface using the ‘Set NPS’ commands.
PAGE 42
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home 2. 586505000/586505500 LMS1000 MAIN CABINET 2.1 Input Ratings 2.1.1 Input Voltage Range: 20 - 60 Volts DC. 2.1.2 Maximum Input Current: 0.7 Amperes. 2.2 Mounting 2.2.1 586505000 List 1: Furnished reversible mounting angles permit mounting in a 19" or 23" wide relay rack with 1" or 1-3/4" multiple drilling.
PAGE 43
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home (E) OEM2 Port (RS-232/RS-422): A 9-pin female D-type jack is provided on the rear of the 586505000/586505500 cabinet. This jack is configured as a DTE (Data Terminal Equipment). This port is software selectable to provide either an RS-232 or an RS-422 connection. Refer to Tables 3 and 4 for pin assignments.
PAGE 44
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 45
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Port Pin Number Application Input/Output 1 2 3 4 5 6 7 8 9 -Transmitted Data (TxD) Received Data (RxD) -Signal Ground (Gnd) ----- -Output from System Input to System ------- Table 5 OEM3 Port (9-Pin Female D-Type Jack) Pin Assignments RS-485 Configured as DCE 2.4.9 2.
PAGE 46
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Provides read only access to view plant voltage and load current, view active alarms, perform channel scans, view the Events Log and Alarm Log, view channel statistics, and view battery discharge history. 2.5.3 Requires LMS1000 firmware version 5.0.0 or later. 2.5.4 List 60 and List 62 require I/O card slot #10.
PAGE 47
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 48
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 49
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 50
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home 3. 586505000/586505500 LMS1000 EXPANSION CABINET 3.1 Input Ratings 3.1.1 Input Voltage Range: 20 - 60 Volts DC. 3.1.2 Maximum Input Current: 0.7 Amperes. 3.2 Mounting 3.2.1 586505000 List 6: Furnished reversible mounting angles permit mounting in a 19" or 23" wide relay rack with 1" or 1-3/4" multiple drilling.
PAGE 51
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Common mode voltage between inputs must not exceed –0.15 to +0.95 volts. 4.4.6 Binary Inputs: Provides eight (8) binary inputs. (A) Single-ended input connections, return is –BAT. (B) Input State: An applied voltage of 12 to 60 volts, DC, is defined as the CC (contact closed) state. An applied voltage of 2.
PAGE 52
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Input State: An applied voltage of 12 to 60 volts, DC, is defined as the CC (contact closed) state. An applied voltage of 2.0 volts or less is defined as the CO (contact open) state. Voltages between 2.0 and 12 volts are undefined. 5.4.5 Alarm State: Either the CC or CO state may be configured as the alarm state.
PAGE 53
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home PHYSICAL SIZE INFORMATION Overall Dimensions (586505000 Main [List 1] and Expansion [List 6] Cabinets) NOTES 1. All Dimensions are in Inches Unless Otherwise Specified 2. Finish: Off-White (M500-117) 3. Weight in Lbs Cabinet Net: 17 Shipping: 21 Circuit Cards, Maximum, Each Net: 0.5 Shipping: 1.5 4.
PAGE 54
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Overall Dimensions (586505000/586505500 Main [List 2] and Expansion [List 7] Cabinets) Home NOTES 1. All Dimensions are in Inches Unless Otherwise Specified 2. Finish: Off-White (M500-117) for 586505000 Textured Gray (M500-147) for 586505500 3. Weight in Lbs Cabinet Net: 17 Shipping: 21 Circuit Cards, Maximum, Each Net: 0.5 Shipping: 1.5 4.
PAGE 55
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Overall Dimensions (586505000/586505500 Expansion Assembly) TOP VIEW 0.56 2.41 0.56 0.56 1.63 1.63 1.189 0.56 3.96 4.878 5.500 LEFT SIDE VIEW 9.060 0.218 x 0.375 Slot (5) Places 0.218 Dia. Hole (1) Place FRONT VIEW 0.218D Slot (8) Places RIGHT SIDE VIEW NOTES 1. All Dimensions are in Inches Unless Otherwise Specified 2. Finish: Off-White 3.
PAGE 56
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Connector Locations (586505000/586505500 Main Cabinet) Front View (Main Cabinet) (19" Cabinet Shown) RS-232 (Located on CPU Circuit Card, Accessible through Front Door) 9-Pin Female D-Type Connector 5 9 6 For Local Terminal Connection List 85: AC Analyzer Port or List 86: TL1/X.
PAGE 57
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 58
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home Connector Locations (586505000/586505500 Expansion Assembly) I/O Ports J19 34 18 1 50 33 17 17 33 50 1 18 34 RJ-45 System Network Port (Expansion Port) I/O Ports J18 Page 58 of 62 This document is property of Emerson Network Power, Energy Systems, North America, Inc.
PAGE 59
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 60
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 61
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No.
PAGE 62
SAG586505000 SAG586505500 Issue AZ, April 7, 2014 System Application Guide Spec. No. 586505000 (Model LMS1000) Spec. No. 586505500 (Model LMS1000) Home REVISION RECORD Issue Change Number (ECO) Description of Change Date Approved 04/15/2009 John Jasko 05/10/2010 John Jasko AT LLP212240 AU LLP213082 AV LLP214281 LMS Dual MCA Interface Software Option added. Spec. No. 582126100 added. LPS (Lorain Power System) changed to NPS (NETSURE™ Power System).