Brochure

Straight 3/8" - 4", 5"
45° & 90° 3/8" - 3", 4"
Aluminum (straight) 3/8" - 3", 4"
Insulated throat (straight) 3/8" - 4", 5"
Insulated throat (45° & 90°) 3/8" - 3", 4"
External ground lug (straight) 3/8" - 4", 5"
External ground lug (45° & 90°) 3/8" - 3", 4"
Insulated throat and external grounding lugs (straight) 3/8" - 4", 5"
Insulated throat and external grounding lugs (45° & 90°) 3/8" - 3", 4"
Wire mesh strain relief (straight) 3/8" - 4", 5"
Wire mesh strain relief (45° & 90°) 3/8" - 3", 4"
Insulated throat and wire mesh strain relief (straight) 3/8" - 3"
Insulated throat and wire mesh strain relief (90°) 3/8" - 1"
Female hub & wire mesh strain relief (straight) 3/8" - 3"
Female hub (straight) 3/8" - 3", 4"
Connector body and compression nut
assure full ferrule-to-body contact
for positive sealing and grounding
Crimpable ferrule stays put
Appleton offers a full range of Class I Division 2 Liquidtight connectors ideally suited for
OEM equipment, as well as harsh and corrosive environments. With only three main
parts the body, long-throat crimpable ferrule and compression nut – Appleton ST
connectors are, at minimum, 25% quicker to install than the competitors. In addition,
the breadth of Appletons ST Liquidtight product line offers a vast range of trade sizes,
confi gurations, and male and female versions in both aluminum and steel. For all these
reasons, Appleton is the top choice whenever a secure, safe connection is paramount.
Fewer parts (3)
speed assembly
STRAIGHT CONFIGURATION
90° CONFIGURATION
45° CONFIGURATION
APPLETON LIQUIDTIGHT ST CONNECTORS – BREADTH/DEPTH CHART
Our complete line of Appleton ST fi ttings may be viewed in catalog section ST or by
visiting our website www.egseg.com/liquidtight. You may also contact us at 800.621.1506
or contact your local Appleton Representative.
FEATURES:
Seals out water, oil, dirt, dust and fumes
Three-piece design (body, nut and ferrule) for
25% faster installation vs. competitive products
Now includes KO sealing ring with lock nut
Bar stock steel or malleable iron –
built-in durability
Compact design – clean OEM look
Distinct ferrule threads – pull-out is four times
greater than UL requirements
Crimpable ferrule – secure mechanical grounding
Decimally equivalent to conduit sizes –
reduces errors and transaction costs
AVAILABLE OPTIONS:
ST-AL = Aluminum
STB = Insulated throat
ST-L = External grounding lugs
STB-L = Insulated throat, external grounding lugs
STB-SR = Wire mesh strain relief
STNSR = Insulated throat and wire mesh
strain relief
STF = Female hub
STFSR = Female hub and wire mesh strain relief
RATINGS:
Suitable for wet locations
UL # E14814
CSA # 65178
Suitable for Hazardous Locations
Class I Div. 2 per NEC 501.10(B)(4)
Class II Div. 1 per NEC 502.10(A)(2)
Class II Div. 2 per NEC 502.10(B)(2)
Class III Div. 1 per NEC 503.10(A)(2)
Class III Div. 2 per NEC 503.10(B)(2)
LiquidTight_APL.indd 3LiquidTight_APL.indd 3 12/22/07 12:13:14 PM12/22/07 12:13:14 PM