Technical Specifications

Liebert XDC and Liebert XDP
89
5.2 Liebert XDP Standard Features
• Heat Exchanger—Brazed plate design with interwoven circuiting constructed of stainless steel
plates, copper brazed.
• Pumps—Centrifugal type, end suction, internally cooled, canned rotor design.
• Cabinet and Frame—Custom powder painted steel panels. A hinged control access panel opens
to a second front panel, which is a protected enclosure for all high-voltage components. Frame is
constructed of 14 gauge heliarc welded tubular steel and painted using an auto-deposition coating
system.
• Liebert iCOM—The Liebert iCOM offers the highest capabilities in control, communication and
monitoring of Liebert Precision Cooling units. The Liebert iCOM is a factory-installed assembly.
Operating conditions and status are indicated on the display, which is mounted either on the
Liebert XDP or on the wall, depending on application details (see user manual, SL-16644). The
control system also monitors unit operation and activates an alarm when any of the specified
factory preset conditions are exceeded.
The Liebert XDP with Liebert iCOM includes two temperature-humidity sensors to aid in
effective cooling.
• CANbus Communication—The Liebert XDP is able to communicate with Liebert XD smart
modules over CANbus. This allows the status of the modules to be viewed from the Liebert XDP
Liebert iCOM display. The Liebert XDP is also able to send remote shutdown signals to the smart
modules. Liebert XD smart modules are able to provide alarm conditions such as fan failure or
condensate detection at the Liebert XDP display.