Operating instructions

Operating Instructions 21

Auto Dial Setting

The Auto Dial Setting screen (which is accessed from the System Configuration screen) controls

the settings of the optional, internal modem. To change any of the auto dial settings, use the Up

or Down push-button switches to move the cursor to the setting to be changed and push the Select

switch. Use the Up or Down push-button switches to toggle the selected values to the desired set-

ting, then press the Select push-button switch to select the desired value. In the case of the auto

dial phone numbers, pressing the Select push-button switch accepts the highlighted number and

moves the cursor to the next digit. After all changes are made, move the cursor to the Exit selec-

tion and press the Select push-button switch to return to the System Configuration screen.

Designated major alarms activate the auto dial modem sequence if the auto dial is enabled and

the unit is equipped with the optional internal modem. Automatic dial attempts are made to the

first number at periodic intervals for the first 30 minutes. If connection is not established in that

time period, the system automatically rolls over to the second number. Auto dial attempts are

made again at periodic intervals for the next 30 minutes. The process repeats itself until connec-

tion is made. Upon connection, the system transmits a present status data, which includes all

active alarms messages. If the History Buffer is frozen, the system transmits the status data for

the event that froze the History Status buffer. After transmission, the modem will automatically

hang up and return to the auto-answer mode.

Figure 21 Auto Dial Setting Screen

AUTO DIAL SETTING SCREEN

YES

2400

0 000 000-0000

xxxxxxxxxxxxxxxxxxx

Enable Auto Dial

Modem Baud Rate

Auto Dial Number

Second Number

Modem Initialization String

CURSOR UP

CURSOR DOWN

CHOOSE

UP :

DOWN :

SELECT :

EXIT