Operating instructions

20 Operating Instructions
System Configuration
The System Configuration screen displays the Static Switch and site “personality” information.
Some of this information, including the system parameters, model number, and order number, is
set at the factory and should be changed only by qualified service personnel. The time, date, and
auto dial parameters may be changed by qualified user personnel. The Language Selection allows
the displays to be changed to English, French, German, Italian, or Spanish.
Certain screens contain the “Security Access” message, which indicates that access for making
changes to these screens is controlled. Changes to these screens should be made only by qualified
personnel. To make authorized changes, access to the rear of the control panel is required to acti-
vate the “Interlock” push-button switch (located on the back of the hinged control panel). The
security access authorization is reset when the screen requiring security access is exited.
Figure 19 System Configuration Screen
Time and Date
The system’s time and date settings are changed using the Time and Date screens, which are
selectable from the System Configuration screen. The Up and Down push buttons are used to
increase or decrease the value indicated by the arrow cursor. The Select push button is used to
move the arrow cursor to the next digit and exit the screen.
Figure 20 Time Screen
EXIT
SECURITY ACCESS
STA250
000000
00000
0000000
Model Number
Order Number
Site ID Number
Site TAG Number
CURSOR UP
CURSOR DOWN
CHOOSE
03/02/98
Date
14:51:59
Time
YES
Auto Dial
UP :
DOWN :
SELECT :
YES
Enable Backlight
System Parameters
Version 1.05
Copyright 1998
Liebert Corporation
All Rights Reserved
System Options
SYSTEM CONFIGURATION
English
Language Selection
Time
13:15:03
WALK-THRU / EXIT
INCREASE VALUEUP :
SELECT :
DECREASE VALUEDOWN :