Brochures and Data Sheets

You Have To Know There Is A Problem
Before You Can Correct The Problem
There are any number of points within a critical facility where an unseen small
problem can develop—and lead to much larger and costlier disasters. These
examples show the types of occurrences that can develop—and what can happen if
they are not responded to in a timely manner.
Battery System
You have a weak cell in your
battery string. Too bad you
won’t find out about it until it
fails five minutes into the next
power outage.
Enclosure Systems
Racks and cabinets are a great way to
consolidate and protect equipment.
But by nature of a cabinet, problems
developed inside can be concealed.
UPS Systems
Your UPS has an internal
fault and has been on
bypass since Sunday. No
one knows about it now—
but they will if you lose
utility power.
Automatic Transfer Switches
You have a utility power outage. Your
UPS is supplying battery power to your
computer equipment and your back-up
generator just came on-line. Life is good,
right? Wrong! If the ATS does not transfer
the load to generator power, then your
network is still going to go down when
you run out of battery power. Too little
knowledge can be a dangerous thing.
Critical Mechanical Systems
The good news is that you had a
redundant pump so that when
your primary pump failed your
cooling system stayed on-line.
The bad news is that you are
down to one pump and you
never know it.
Liebert Monitoring
Solutions Fall Into
These Seven Categories:
Third Party Monitoring
Connectivity
The use of open protocols allows you to
interface Liebert units and monitoring
systems with other types and brands of
control equipment including BMS, NMS,
SCADA and fire alarm systems.
Automated Shutdown Software
Protects your data from being lost
or corrupted during extended power
outages by initiating an orderly
shutdown of your computer systems.
Local And Remote Monitoring
Provides basic monitoring and control
for single or small groups of equipment
either at the equipment location or to
a remote site.
Battery Monitoring
Detects battery problems by continuously
monitoring all critical battery parameters
such as cell resistance, inter-cell and
inter-tier connections, cell voltage, overall
string voltage, current and temperature.
Leak Detection
Alerts facility personnel to the
presence of leaking fluids before
serious damage results.
IT Monitoring
Provides cost-efficient, centralized
monitoring of various power and
environmental units utilizing an
existing network infrastructure.
Advanced Monitoring
Offers comprehensive, centralized
monitoring, control, data analysis
and reporting for a full range of
computer support systems.
6
1
4
2
3
5
6
7
2567
267
3672
56721
1257