Quick Start Guide

6
B - S TART THE V IEWER AND L OG O N AS “A DMINISTRATOR ”
To start the application:
• Double-click on the program icon (if added to the computer
desktop during installation) OR
• Click on the Start button, then on Programs, then on Nform Viewer.
To log on:
• Enter Administrator in
the User name box on
initial startup.
By default, the
Administrator account
has full access to all
software features
including configuration.
• Leave the Password
box blank on initial
startup. No password
is required for the first login. You will be prompted to create a password
after logging in.
• In the Server box, enter the IP address or domain name of the server
where Liebert Nform was installed.
• Click on the Login button.
NOTE: If you have trouble logging in, click the About button for technical
support information.
11
• In the Discover Managed Devices window, below left, enter ranges of IP
addresses to search:
• Enable - Place a check mark
; for each range you wish to search now.
Each range remains available for future searches until removed by
clicking the Delete row button.
• Start IP address - Click in the box and enter the lower end of the
range—e.g., 198.162.0.10.
• End IP address - Click in the box and enter the upper end—
198.162.0.50.
Two columns display results from previous searches: Not mgd (number of
devices found but not yet added to Managed Devices list) and Unknown
(number of devices found but not currently supported by the software).
• Click Next to start the Auto Discovery process. The Search Progress win-
dow opens, below right.
• When the search is complete, the progress bar shows 100%. Click Next.