User manual

Installation in Knurr Miracel
™
Rack—Vertical, Zero-U Mount
7
2.3 Reposition Input Power Cord
The Liebert MPH is shipped from the factory with the input power cord entering from the end of the
unit. The cord can be repositioned if it will need to enter from the front. To reposition the cord:
1. Remove the four screws retaining the input power plate.
2. Reposition so that power cord enters from front.
3. Reinstall the screws and tighten them.
Figure 5 Reposition input power cord
Input Power
Plate Screws
Input Power Plate
Repositioned for Different
Cable Angle