User Guide

9
TROUBLESHOOTING
Problem Cause Solution
UTILITY lamp (orange) not
illuminated.
Utility not present. Call qualified service personnel to restore
power to socket.
3U POD input cord not
connected to utility.
Refer to 3U POD installation instructions in
this manual:
• Installation and Start-Up and
• Mount the POD in the Rack.
UPS Available lamp (green) not
illuminated.
UPS output power not
present.
Turn on UPS. Refer to UPS user manual.
UPS input and/or output cord
not connected to 3U POD.
Refer to 3U POD installation instructions in
this manual:
• Installation and Start-Up and
• Mount the POD in the Rack.
3U POD will not start some / all
connected loads.
3U POD output circuit
breaker has tripped.
Reset 3U POD circuit protectors.
3U POD circuit protectors trip
after resetting.
Overcurrent on 3U POD
socket.
Recalculate load requirements, distribute
load among other 3U POD sockets.