User Guide

6
RACK MOUNT INSTALLATION
1. Rack mount installation of the 2U POD is possible with the use of the rack mounting
brackets (shipped with the POD). See Figure 6.
2. The rack mount brackets allow you to rack mount the POD in a 19" enclosure (23" to 19"
rack adapters would have to be purchased separately if you are using our 23" Foundation
or equivalent cabinet).
3. The POD can be mounted to face one of four directions depending on your application,
utilizing the rack mount brackets provided.
4. Determine the desired position and direction for the POD, face it in that direction, then
attach the brackets to the POD with the screws provided.
5. Consult your rack/enclosure manufacturer’s recommendations for specific rack mounting
hardware that will be required.
6. The holes on the rack mount bracket are notched for easy installation. Tighten the POD
securely to the rails and then follow the start-up directions for the POD in the previous
section, Installation on GXT 2U UPS.
Figure 6 2U POD with rack mounting brackets
OUTPUT
UPS
PUSH TO RESET
UPS
AVAILABLE
UPS UTILITY
MAINTENANCE BYPASS
AVAILABLE
CONNECT UPS
LINE CORD HERE
PUSH TO RESET
IF UTILITY LAMP IS ILLUMINATED
MAINTENANCE BYPASS POSITION
MAY BE SELECTED
SWITCH TO UPS POSITION ONLY
WHEN UPS LAMP IS ILLUMINATED
CAUTION
OUTPUT
UTILITY
15
A
M
P
15
A
M
P
Rack mounting brackets