User's Manual

Jumper Setup
5
4.0 JUMPER SETUP
Refer to Table 2 and the figure below for jumper setup.
Table 2 Jumper connections
# Connection Description
JP01
Pin 9
to
Pin 17
Allows all relay COMMONS to be tied
together.
JP02
Pin 7
to
Pin 17
Allows all relay COMMONS and the ANY
MODE SHUTDOWN GROUND to be tied
together.
NOTE: This jumper should be removed if
there is any external voltage source that
may intentionally or inadvertently be
connected to the DB25 pins.
Jumper
JP01
Jumper
JP02