Specifications

High Quality Surge Protection
Liebert PSS Surge Protection Strips–
Provide computer grade power, protecting
connected equipment from the damaging
effects of lightning, spikes, surges, and
other power quality problems.
Islatrol
®
SP-6TVN Series—The Islatrol
SP-6TVN is a surge suppressor/filtering
device that features uniquely designed
repositionable outlets and protects sensitive
home/office equipment including home
theaters, satellite dishes, computers,
printers and faxes.
PowerSure LPL & LPM Series—Surge
suppression systems protect connected
equipment against electric power line
disturbances and transients in medium
and low exposure locations. Displays LED
indication per phase. Provides remote
indication capabilities. Alerts with
audible alarm.
Islatrol™ RM Series—This line of AC surge
protectors is ideal for protecting the power
feeding valuable rack equipment. This series
provides 40,000 Amps of surge protection
and up to 60 dB of high- frequency noise
filtering.
Edco RM-CAT6 Series—Includes 16 and
48-channel high-speed data line protectors
that utilize three-stage hybrid technology.
These units address high-energy voltage
transients that can damage expensive
network equipment. Ideal for network
patch panels, switches and hubs, these
units mount easily in the same racks as the
equipment they are protecting.
Edco PC642 Series—The Edco PC642 Series
surge suppressor is a two-pair (four-wire)
module implementing three-stage hybrid
technology. This module addresses
over-voltage transients with gas tubes and
silicon avalanche components.
Edco LCDP Series—The Edco LCDP Series
is designed to conveniently protect 8 wire,
low voltage data circuits and employs two
RJ-45 jacks for easy installation.
Edco RJA-RJD Series—The Edco
RJA and Edco RJD Series are four pair
telephone/data line protectors that
implement advanced two stage
hybrid design.
Edco CAT6-5 POE Series—The Edco
CAT6-POE Series is designed to work
on Category 5 Power-Over-Ethernet
transmission lines as well as CAT 6
applications.
Edco PHC Series—This surge suppressor
is designed to protect two pairs of wires
specifically for alarm and security systems
where operating currents can be as high
as 5 Amps. It utilizes three-stage hybrid
technology to address overvoltage
transients and sneak and fault current
for signaling circuits.
Home and Office Protection Data/Signal Line Protection
Medium & Low
Exposure Systems
Liebert manufactures the industry’s widest range of
Surge Protective Devices (SPDs). These SPD’s are ideal
for small facilities, large equipment rooms or entire
buildings. Plus a wide range of power, control and data
line applications. Each surge protection product features
the rugged reliability that has been Liebert’s trademark
for more than 30 years.
Installing protection at the electrical service entrance,
distribution points, branch panelboards and on specific
sensitive loads or equipment throughout your facility
is the best way to prevent damage and eliminate
associated downtime to sensitive microprocessor-
based electronics.
41
41
Surge Protection And Power Conditioning Systems