User's Manual

Important Safety Instructions
Liebert
®
DCP
™
2
NOTICE
Risk of leaking chilled water and drain lines. Can cause equipment and building damage.
Lines and joints must be inspected regularly. Improper installation, application and service
practices can result in water leakage from the unit. Water leakage can result in severe
property damage and loss of critical data center equipment. Do not locate unit directly above
any equipment that could sustain water damage. Emerson Network Power
®
recommends
installing monitored leak detection equipment for the unit and its factory- and field-installed
supply, return and drain lines.
Figure 1 Model number nomenclature
R
Redundant
Pumps
DCP 200 B *
Revision
level
Liebert
Data Center
Pumping Unit
Nominal
Capacity
Example: DCP200RA– –*
A
A = 460V-3ph-60Hz
(voltage-phase-frequency)
C = 208V-3ph-60Hz
M = 380/415V-3ph-50Hz
2
2 = 12°F (°C)
Heat
Exchanger
B = Bottom
Piping for
Secondary
Loop
B
B = Bottom
Chilled
Water
Connection