User's Manual

Liebert iCOM

Control—Firmware Version XP1.00.DCP.01R

Liebert

DCP

™

4.3.2 Cooling Module Overview—Applies Only to Liebert XDP

™

The Liebert iCOM

will display an overview of all connected cooling modules. It does not display a

system view, which would include units other than the cooling modules.

To display an overview of all connected cooling modules:

1. At the default home screen on the Liebert iCOM, press the Down arrow. This will display the first

10 modules’ outlet temperature and capacity levels. Press ESC to return to the unit view.

Figure 27 Cooling module overview, first 10 modules—Applies only to Liebert XDP

2. Press the down arrow button again to display the next 10 modules’ outlet temperature and

capacity levels.

3. Press ESC to return to the default home screen.

NOTE

The Liebert iCOM control screens display a setting to select a system view, but the Liebert DCP

does not support a system view.

UNIT 1

OFF 9/2015100 %

212°F

Max XD Supply

Air Temp

Liebert XDP

AA01 AA01 AA01 AA01 AA01 AA01 AA01 AA01 AA01AA01

(01) 9/12/2014 08:33 RST General Alarm

(01) 9/12/2014 08:20 ACK HIGH CHILLED WATER TEMP

8/4/2012 14:13:54 ALARM OFF

? for help

for next/previous unit

for system view

ESC

for previous screen

for menu

°F 70 72 74 76 75 73 74 71 77 72