User's Manual

Product Description
Liebert
®
DCP
™
8
Figure 6 Securing the Liebert DCP to piano jacks
1.3.6 Removing the Unit from the Piano Jacks
1. Lower the Liebert DCP as far as the piano jacks will allow.
2. Undo all strapping holding the piano jacks to the unit.
3. Lift one end of the Liebert DCP off one piano jack with a pry bar or similar device, taking care not
to damage the unit’s cabinet.
4. Repeat Step 3 to remove the piano jack from under the opposite end of the Liebert DCP.
5. Remove all material used to protect the unit from the piano jacks and strapping.
Using a forklift to put a
Liebert DCP on piano jacks
Using rigging to put a
Liebert DCP on piano jacks
Liebert DCP Secured
to piano jacks