User's Manual

Product Description
7Liebert
®
DCP
™
Figure 5 Removing the unit from the skid using rigging
1.3.5 Moving the Liebert DCP Using Piano Jacks
1. Elevate the Liebert DCP with a lifting mechanism, such as a forklift or rigging.
2. Position one piano jack at each end of the Liebert DCP.
3. Lower the unit to a height suitable for placing it on the piano jacks.
4. Put protective material between the Liebert DCP and the piano jacks and straps.
5. Secure the Liebert DCP to the piano jacks.
6. Release the Liebert DCP from the straps securing it to the lifting mechanism and move the
mechanism away from the unit.
Using the piano jacks, at least two properly trained and qualified personnel can move the unit.
Equally
Spaced
Equally
Spaced
Center of
Gravity
Symbols
Spreader
Bars
Lag
Bolts
Bracket
If rigging will be used
to transport the
Liebert DCP, place one
or two horizontal
straps around the unit
and the vertical straps
about this height.
Cushioning material
not shown for clarity.