Brochures and Data Sheets

Controls
For the highest levels of reliability — and
to minimize site downtime — critical
shelters can be equipped with two Liebert
InteleCool 2 units and an autochangeover
system that balances runtime and
automatically switches from one unit to
another unit if required.
Flexible Outdoor Wallmount
Cooling For Shelters And
Other Structures
Even though they look the same on the outside, telecom
shelters and other remote buildings have very
different requirements.
That’s why the versatile Liebert InteleCool 2 isn’t
just another shelter air conditioner...it’s a custom-
configured model that fits your exact needs and
budget. Whether you need a bare-bones system
at minimum cost…top-of-the-line dual units with
remote monitoring… or anything in between —
Liebert InteleCool 2 is designed with the flexibility
to match the multiple protection needs of today’s
communications industry. Units are available in 2, 3,
4, and 5 ton models, 50 or 60 Hz, to accommodate
varied cooling requirements.
The Liebert InteleCool 2 System Is Perfect For
Many Critical Applications:
Communications switching facilities including
cellular, radio paging, microwave/satellite earth
stations and PCS services.
Modular electronic equipment structures.
Many other locations requiring cooling in a
lightweight, efficient package.
Liebert InteleCool 2 Product Features Include:
Self-contained design with all components enclosed in a
painted steel or optional corrosion-resistant aluminum cabinet.
Wide range of units available for year-round operation in
ambient temperatures ranging from -20°F (-29°C) up to
120°F (48.9°C).
Telecom Package incorporates popular options including low
pressure switch, low pressure bypass and fan cycle control.
Energy efficient scroll compressor operates quietly, which
helps reduce the sound of units when shelters are located
near neighbors.
With right hand or left hand compressor location, the space
used by a pair of units can be reduced while improving
accessibility to the compressors.
Outside air options include economizer for cooling using
outside air and fresh air damper which allows a continuous
amount of air to beintroduced through the unit.
Wired, piped, charged with refrigerant and fully factory
tested as a system, to ensure easy, trouble-free installation
and start-up.
Economizer Option
The Liebert InteleCool 2 can be equipped
with an economizer system that uses
modulating dampers to draw in filtered,
outside ambient air for cooling when the
exterior temperature drops below a pre-
set level. These outside air temperature
settings are field adjustable. The
economizer saves energy and reduces
component wear.
®
Painted steel or
aluminum cabinets
Optional Economizer
with spring-return
actuator
Copper-tube,
aluminum fin coils
High efficiency
R-407C scroll
compressor
Choice of compressor
on right or left side
of unit
Heavy-duty double
width blower
Liebert InteleCool
®
2 Cooling For Shelter Applications
7
Headline