Owner`s manual
13
English
INTRODUCTION
PREPARATION
WATCHING TV
USING FUNCTIONS
USEFUL TIPS
CONNECTING DEVICES
INFORMATION
FREEZE
SLEEP
BACK
MENU INFO
CHVOL
SAP
MUTE
4 5 6
7 8 9
0 .
1 2 3
SOURCE
FORMAT
ECO
PREV CH
OK
SOURCE
FREEZE
SLEEP
FORMAT
CHVOL
SAP
MUTE
4 5 6
7 8 9
0 .
1 2 3
PREV CH
11.1
salut!
hola!
hi!
Freeze Mode can freeze the image shown on the TV screen for 5 minutes.
Press FREEZE to freeze the image.
Freeze
• The sound output will not be paused.
• To cancel freeze mode, press any buttons except
y.
TV Screen Display Mode
5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display
modes can be selected for PC input signal.
Press FORMAT
repeatedly to switch the TV aspect ratio.
For 16:9 video signal
Normal
Wide
4:3 Movie expand
Zoom
Normal displays a 16:9 picture at its original size.
4:3 displays a 16:9 picture at a 4:3 size; the picture
is shortened horizontally. Sidebars appear on both
edges of the screen.
Movie expand displays a 16:9 picture that is
vertically stretched to ll the screen. This only crops
out the top of the picture.
Zoom displays a 16:9 picture at its maximum size
without changing its horizontal and vertical ratio.
Wide displays a horizontally stretched picture. This
crops out the left and right sides of the picture.
For 4:3 video signal
Normal
Wide
16:9 Movie expand
Zoom
Normal displays a 4:3 picture at its original size.
Sidebars appear on both edges of the screen.
16:9 displays a 4:3 picture at a 16:9 size; the picture
is stretched horizontally to ll the screen.
Movie expand displays a 4:3 picture at a 16:9 size;
the picture is stretched more vertically at the top of
the screen. This crops out the top of the picture.
Zoom displays a 4:3 picture at a 16:9 size; at its
maximum size that is more vertically stretched to
ll the screen. This crops out the top and bottom of
the picture.
Wide displays the picture with its center at the
original size and the edges stretched horizontally to
ll the screen.
For PC input signal
Normal displays a proportionately stretched
picture. Sidebars appear on both edges of the screen.
Full displays a picture that is stretched out of
proportion horizontally to ll the screen.
Unscaled displays a picture in its original size.
Normal UnscaledFull
Channel Selection
Select channels by using CH ▲/▼ or the Number buttons.
• To select the memorized channels, use CH ▲/▼ or the Number buttons.
• To select the non-memorized channels, use the Number buttons.
To use the Number buttons
ATSC
- When selecting digital channel 11.1
Be sure to press
•
before entering the subchannel number.
1
OK
1 1
.
Press PREV CH to return to the previously viewed channel.
NTSC
- When selecting cable or analog channel 11
1
OK
1
Note
• [No Signal] will appear on the TV screen after the subchannel broadcast is over.
• [Audio only program] message will appear on the TV screen, when you receive only sound signal.